Power You Control
Lightning strikes and utility switching can cause voltage transients and power surges in the electrical grid. These surges travel through distribution lines and into homes or businesses, damaging sensitive electronic appliances and shortening their life. Many transients go undetected, but overtime, contribute to sudden and inexplicable failures of electrical equipment. Products that are susceptible to damage include: mobile phones, computers, televisions, appliances, smart home devices, and lighting fixtures. Generac’s whole-house surge protection device (SPD) helps protect against these damaging surges and transients by blocking them from entering homes or businesses. It has thermally protected metal oxide varistors (MOVs) that help reduce risk of thermal damage. Its compact, weather-resistant design offers installation flexibility.
Generac SPDs may be installed:
• Indoors or Outdoors
• Within a Distribution Panel on the Load Side of a 20 amp Breaker Standard
Features
• 50 k Amp Per Phase Surge Current Capacity
• 200 k Amp Short Circuit Current Rating
• Pre-wired with 24 Inches of 12-gauge Wire L1, L2, and N
• 1/2 Inch Nipple Mount
• NEMA 4X Enclosure
Specifications
Surge Current Capacity Per Phase 50 kA
Nominal Discharge Current (In) 20 kA
Short Circuit Current Rating (SCCR) 200 kA
SPD Type Rated Type 1 or Type 2
System Voltages Available 120/240 VAC
Single Split-phase Protection Modes L-N, L-L
Maximum Continuous Operating Voltage (MCOV)150 L-N, 300 L-L
Voltage Protection Rating (VPR) 600V L-N, 1000V L-L
Input Power Frequency 50/60 Hz
Enclosure Rating NEMA 4X
Operating Temperature-4 °F through 122 °F (-20 °C through 50 °C)
Operating Humidity 5% through 95%, non-condensing
Operating Altitude Up to 6,500 ft (2,000 m)
Agency Certification and Approvals UL1449 4th Edition Listed
Device Warranty 2 Years
Length (in / mm)L 4.29 / 109.0
Width (in / mm) W1 4.02 / 102.1 W2* 2.68 / 68.0
Depth (in / mm)D 2.52 / 64.0
Wire Range 12 gauge (24 in, pre-wired)
* W2 is Width without feet